Hot Under Pressure Truck Setup
Self-Contained high-pressure water blaster with vacuum recovery and recycling system.
3600 Psi @ 26.6Lpm high pressure water blaster powered by a 35Hp Kohler V-Twin Command Pro petrol engine. 12 volt DC hot water boiler connected to pump with Genisys burner protection system.
Self-Contained high-pressure water blaster with vacuum recovery and recycling system.
3600 Psi @ 26.6Lpm high pressure water blaster powered by a 35Hp Kohler V-Twin Command Pro petrol engine. 12 volt DC hot water boiler connected to pump with Genisys burner protection system.
Large 80L petrol and 60L Diesel tank with CAV fuel Filtration to feed both vacuum and pressure cleaner engine, along with diesel supply for burner.
Gear box drive to a Hawk Premium series Pump, with a close coupled 13Kva Three Phase Generator connected to the thru shaft from the Hawk Pump.
Extreme duty stainless steel unloader with over pressure safety device and easy start valve fitted to pump. Extended oil bath fitted to pump for longer service intervals.
20” Hg and 230 CFM Condor vane vacuum pump belt driven from 22Hp Honda V-Twin Petrol engine. Built in automatic continuous oiler and Condor vacuum protection package fitted to recovery tank.
316 Stainless Steel Recovery and debris tanks with pump extraction to filtration system. Tanks setup ready to be used in extreme and corrosive environments such as sea water and mine water. Bypass valves to bypass water to on-board dirty tank, back to the ground or through twin 3” Super Disc filters and into the main 2000L water tank.
Rear mounted automatic wheelie bin cleaner with hydraulic lifting arms and automatic rotating heads to clean bins from 240L general household waste bins to 1100L commercial waste bins. Auxiliary short 600mm lance for cleaning bin extremities.
Separate tank recycles and supplies water to pressure cleaner pump to eliminate contamination issues, with optional pump for transfer to dirty water tank.
Twin 20L drum stands with twin diaphragm pumps and two in one spray lance for cleaning, degreasing, deodorizing bins while cleaning.
Supplied with
· 60m high pressure two wire hose fitted to a 100m manual re-wind extreme duty hose reel
· 30m low pressure ¾” garden hose fitted to hose reel and connected to internal float in water tank.
· Heavy Duty Gun, lance, 4 quick connect nozzles, and rotary nozzle.
· 30m 2” hot water rated vacuum hose with camlock connectors & static hose reel for storage.
· 12” suction nozzle for fitting to vacuum hose
· Twin 6m sand filled berms
· 21” Mosmatic surface cleaner with recovery port
· 7.3m extension lance with connection for nozzles
Optional extras
· Cyclone Filtration System for recycling system
· Enclosed frame with sound dampening material.
· Upgrade to Diesel Engine with Dual Output gearbox for driving hydraulic pump, pressure cleaner etc
· Drain Cleaning Setup with connections to existing reel
Fit Automatic rewind to extreme duty reel in either electric or hydraulic.
Provision to run pressure cleaner system from external supply and pump recovered water to external tank.
Hot Under Pressure Truck Setup
Self-Contained high-pressure water blaster with vacuum recovery and recycling system.
Self-Contained high-pressure water blaster with vacuum recovery and recycling system.
3600 Psi @ 26.6Lpm high pressure water blaster powered by a 35Hp Kohler V-Twin Command Pro petrol engine. 12 volt DC hot water boiler connected to pump with Genisys burner protection system.
Large 80L petrol and 60L Diesel tank with CAV fuel Filtration to feed both vacuum and pressure cleaner engine, along with diesel supply for burner.
Gear box drive to a Hawk Premium series Pump, with a close coupled 13Kva Three Phase Generator connected to the thru shaft from the Hawk Pump.
Extreme duty stainless steel unloader with over pressure safety device and easy start valve fitted to pump. Extended oil bath fitted to pump for longer service intervals.
20” Hg and 230 CFM Condor vane vacuum pump belt driven from 22Hp Honda V-Twin Petrol engine. Built in automatic continuous oiler and Condor vacuum protection package fitted to recovery tank.
316 Stainless Steel Recovery and debris tanks with pump extraction to filtration system. Tanks setup ready to be used in extreme and corrosive environments such as sea water and mine water. Bypass valves to bypass water to on-board dirty tank, back to the ground or through twin 3” Super Disc filters and into the main 2000L water tank.
Rear mounted automatic wheelie bin cleaner with hydraulic lifting arms and automatic rotating heads to clean bins from 240L general household waste bins to 1100L commercial waste bins. Auxiliary short 600mm lance for cleaning bin extremities.
Separate tank recycles and supplies water to pressure cleaner pump to eliminate contamination issues, with optional pump for transfer to dirty water tank.
Twin 20L drum stands with twin diaphragm pumps and two in one spray lance for cleaning, degreasing, deodorizing bins while cleaning.
Supplied with
· 60m high pressure two wire hose fitted to a 100m manual re-wind extreme duty hose reel
· 30m low pressure ¾” garden hose fitted to hose reel and connected to internal float in water tank.
· Heavy Duty Gun, lance, 4 quick connect nozzles, and rotary nozzle.
· 30m 2” hot water rated vacuum hose with camlock connectors & static hose reel for storage.
· 12” suction nozzle for fitting to vacuum hose
· Twin 6m sand filled berms
· 21” Mosmatic surface cleaner with recovery port
· 7.3m extension lance with connection for nozzles
Optional extras
· Cyclone Filtration System for recycling system
· Enclosed frame with sound dampening material.
· Upgrade to Diesel Engine with Dual Output gearbox for driving hydraulic pump, pressure cleaner etc.
HD275-20YMS
Units had to be “class A” compliant, hot water, fully enclosed & easy to service & maintain.
Model Number: HD275-20YMS
This project was for nineteen custom-built units specifically built for an international company for use at numerous Hunter Valley mine sites. They had to be built to be compliant with the companies & mine sites stringent requirements for pressure cleaners on site. Units had to be “class A” compliant, hot water, fully enclosed & easy to service & maintain.
The units are powered by a 3 cyl Yanmar 36.3hp diesel engine with direct drive to a Comet “premium” series pump with an output of 275Bar/4000psi @ 20Lpm.
The Yanmar engine features electronic push button start with full engine protection via a Deep-Sea controller all mounted in a stainless steel control box.
Specifications Include:
- 275 Bar, 4000Psi Pump Operating Pressure.
- 21 Litre Per Minute Flow Rate.
- 27Kw/36Hp Electric Start, Three Cyl, Water Cooled Diesel Engine.
- Engine Protection Package
- H.D. Low Speed Premium Series Pump
- Flex Coupling Direct Drive
- Forged Brass Pump Head
- Ceramic Pistons and SS Valves
- 12 Volt Diesel Burner
- Temp to 90°C
- Stainless Steel Burner Covers
- 75 Litre Diesel Fuel Tank
- Heavy Duty External Bypass/Unloader Valve
- Over Pressure Safety Valve
- H.D Inlet Water Disc Filter
- Key Stop
- Emergency Stop Switch
- Lockable Battery Isolator
- MDG15 Compliant
- Marine 2-pack skid mount base & cover
- Hour/Run Meter
HD275-21KMS
This project was for a custom-built unit specifically built for use at numerous Hunter Valley mine sites. They had to be built to be compliant with the mine sites stringent requirements for pressure cleaners on site. Units had to be mine compliant, hot water, preferably air cooled & easy to service & maintain.
Diesel Hot Water Self Contained, Air Cooled Engine
HD275-21KMS
This project was for a custom-built unit specifically built for use at numerous Hunter Valley mine sites. They had to be built to be compliant with the mine sites stringent requirements for pressure cleaners on site. Units had to be mine compliant, hot water, preferably air cooled & easy to service & maintain.
The unit is powered by a twin cyl Kohler diesel engine with reduction gearbox drive to a Comet “premium” series pump with an output of 275Bar/4000psi @ 21Lpm.
The Kohler engine features key start with basic engine protection mounted in a water resistant control box.
Specifications Include:
- 275 bar, 4000psi pump operating pressure.
- 21 litre per minute flow rate.
- Water temps to 90⁰ c
- Twin cyl, air cooled diesel engine.
- H.D. low speed premium series pump.
- Reduction gearbox drive.
- Forged brass pump head.
- Ceramic pistons and ss valves
- 12 volt diesel burner
- Temp to 90°c
- Stainless steel burner covers
- 110 litre diesel fuel tank
- Heavy duty external bypass/unloader valve
- Over pressure safety valve
- H.D. inlet water disc filter
- Key stop
- Emergency stop button
- Lockable battery isolator
- Mdg15 compliant
- Marine 2-pack painted skid mount base
- H.D. manual crank hose reel
- 50 metres hp hose
Durable and reliable: CW200-32YMS
This project was a custom-built unit specifically built for a major local contractor for use at one of the largest mines in the Hunter Valley. It was built to be compliant with that mines stringent requirements for pressure cleaners on site.
This project was a custom-built unit specifically built for a major local contractor for use at one of the largest mines in the Hunter Valley. It was built to be compliant with that mines stringent requirements for pressure cleaners on site.
The unit is powered by a genuine 36.3HP Yanmar Diesel Engine. The 3000 RPM run speed of the engine is accomplished by belt driving the pump. With an output of 210bar/3000Psi @ 32lpm this is a “class B” machine
The Yanmar engine features electronic push button start achieved by running a Deep-Sea engine controller mounted in a stainless-steel control box with an emergency stop and four pole lockable battery isolator. The engine also has oil pressure and charge failure protection fitted to the controller.
Specs:
- Genuine Yanmar 3TNV88 Engine
- 36.3HP @ 3000rpm
- Lower exhaust emission
- Low noise and vibration
- Stainless Steel Control Box
o Deep Sea Controller
o Emergency Stop
o Four Pole Battery Isolator
- Stainless Steel Cover
o Featuring access port for ease of oil checks
o Safety Signage
o Sloped roof for easy rain runoff
- Compact, easy to start and operate.
- Fuel efficient
- Durable and reliable.
Diesel Hot Water Self Contained
These unit where designed & manufactured for a local company who were cleaning at several mine sites & shipping ports in the Hunter Valley.
Diesel Hot Water Self Contained, 2 Units Mounted on Ex-Fire Truck
Model Number: HW200-21YMS
These unit where designed & manufactured for a local company who were cleaning at several mine sites & shipping ports in the Hunter Valley. The requirements where that 2 units had to fit on a ex rural fire truck & had to be within a certain budget. Diesel supply had to last a minimum of 14 hrs so no mid shift re-fueling was required. Both units have since been upgraded to 26lpm @ 210Bar.
Specifications Include:
- Yanmar 3 Cyl diesel engine
- 200 Bar, Psi Pump Operating Pressure.
- 26 Litre Per Minute Flow Rate.
- Water temps to 90⁰
- 12 Volt Diesel fired burner.
- Engine protection system.
- Genisys burner safety system.
- Comet premium series pump.
- Reduction belt drive.
- Mine Compliant.
- Class “A”.
- Safety Signage.
- 2-Pack marine epoxy coated frame & cover.