Hot Under Pressure Truck Setup

Self-Contained high-pressure water blaster with vacuum recovery and recycling system.

3600 Psi @ 26.6Lpm high pressure water blaster powered by a 35Hp Kohler V-Twin Command Pro petrol engine. 12 volt DC hot water boiler connected to pump with Genisys burner protection system.

Large 80L petrol and 60L Diesel tank with CAV fuel Filtration to feed both vacuum and pressure cleaner engine, along with diesel supply for burner.

Gear box drive to a Hawk Premium series Pump, with a close coupled 13Kva Three Phase Generator connected to the thru shaft from the Hawk Pump.

Extreme duty stainless steel unloader with over pressure safety device and easy start valve fitted to pump. Extended oil bath fitted to pump for longer service intervals.

20” Hg and 230 CFM Condor vane vacuum pump belt driven from 22Hp Honda V-Twin Petrol engine. Built in automatic continuous oiler and Condor vacuum protection package fitted to recovery tank.

316 Stainless Steel Recovery and debris tanks with pump extraction to filtration system. Tanks setup ready to be used in extreme and corrosive environments such as sea water and mine water. Bypass valves to bypass water to on-board dirty tank, back to the ground or through twin 3” Super Disc filters and into the main 2000L water tank.

Rear mounted automatic wheelie bin cleaner with hydraulic lifting arms and automatic rotating heads to clean bins from 240L general household waste bins to 1100L commercial waste bins. Auxiliary  short 600mm lance for cleaning bin extremities.

Separate tank recycles and supplies water to pressure cleaner pump to eliminate contamination issues, with optional pump for transfer to dirty water tank.
Twin 20L drum stands with twin diaphragm pumps and two in one spray lance for cleaning, degreasing, deodorizing bins while cleaning.

Supplied with

·         60m high pressure two wire hose fitted to a 100m manual re-wind extreme duty hose reel

·         30m low pressure ¾” garden hose fitted to hose reel and connected to internal float in water tank.

·         Heavy Duty Gun, lance, 4 quick connect nozzles, and rotary nozzle.

·         30m 2” hot water rated vacuum hose with camlock connectors & static hose reel for storage.

·         12” suction nozzle for fitting to vacuum hose

·         Twin 6m sand filled berms

·         21” Mosmatic surface cleaner with recovery port

·         7.3m extension lance with connection for nozzles

Optional extras

·         Cyclone Filtration System for recycling system

·         Enclosed frame with sound dampening material.

·         Upgrade to Diesel Engine with Dual Output gearbox for driving hydraulic pump, pressure cleaner etc

·         Drain Cleaning Setup with connections to existing reel

Fit Automatic rewind to extreme duty reel in either electric or hydraulic.

Provision to run pressure cleaner system from external supply and pump recovered water to external tank.