HD275-20YMS
Units had to be “class A” compliant, hot water, fully enclosed & easy to service & maintain.
Model Number: HD275-20YMS
This project was for nineteen custom-built units specifically built for an international company for use at numerous Hunter Valley mine sites. They had to be built to be compliant with the companies & mine sites stringent requirements for pressure cleaners on site. Units had to be “class A” compliant, hot water, fully enclosed & easy to service & maintain.
The units are powered by a 3 cyl Yanmar 36.3hp diesel engine with direct drive to a Comet “premium” series pump with an output of 275Bar/4000psi @ 20Lpm.
The Yanmar engine features electronic push button start with full engine protection via a Deep-Sea controller all mounted in a stainless steel control box.
Specifications Include:
- 275 Bar, 4000Psi Pump Operating Pressure.
- 21 Litre Per Minute Flow Rate.
- 27Kw/36Hp Electric Start, Three Cyl, Water Cooled Diesel Engine.
- Engine Protection Package
- H.D. Low Speed Premium Series Pump
- Flex Coupling Direct Drive
- Forged Brass Pump Head
- Ceramic Pistons and SS Valves
- 12 Volt Diesel Burner
- Temp to 90°C
- Stainless Steel Burner Covers
- 75 Litre Diesel Fuel Tank
- Heavy Duty External Bypass/Unloader Valve
- Over Pressure Safety Valve
- H.D Inlet Water Disc Filter
- Key Stop
- Emergency Stop Switch
- Lockable Battery Isolator
- MDG15 Compliant
- Marine 2-pack skid mount base & cover
- Hour/Run Meter
Durable and reliable: CW200-32YMS
This project was a custom-built unit specifically built for a major local contractor for use at one of the largest mines in the Hunter Valley. It was built to be compliant with that mines stringent requirements for pressure cleaners on site.
This project was a custom-built unit specifically built for a major local contractor for use at one of the largest mines in the Hunter Valley. It was built to be compliant with that mines stringent requirements for pressure cleaners on site.
The unit is powered by a genuine 36.3HP Yanmar Diesel Engine. The 3000 RPM run speed of the engine is accomplished by belt driving the pump. With an output of 210bar/3000Psi @ 32lpm this is a “class B” machine
The Yanmar engine features electronic push button start achieved by running a Deep-Sea engine controller mounted in a stainless-steel control box with an emergency stop and four pole lockable battery isolator. The engine also has oil pressure and charge failure protection fitted to the controller.
Specs:
- Genuine Yanmar 3TNV88 Engine
- 36.3HP @ 3000rpm
- Lower exhaust emission
- Low noise and vibration
- Stainless Steel Control Box
o Deep Sea Controller
o Emergency Stop
o Four Pole Battery Isolator
- Stainless Steel Cover
o Featuring access port for ease of oil checks
o Safety Signage
o Sloped roof for easy rain runoff
- Compact, easy to start and operate.
- Fuel efficient
- Durable and reliable.
Diesel Hot Water Self Contained
These unit where designed & manufactured for a local company who were cleaning at several mine sites & shipping ports in the Hunter Valley.
Diesel Hot Water Self Contained, 2 Units Mounted on Ex-Fire Truck
Model Number: HW200-21YMS
These unit where designed & manufactured for a local company who were cleaning at several mine sites & shipping ports in the Hunter Valley. The requirements where that 2 units had to fit on a ex rural fire truck & had to be within a certain budget. Diesel supply had to last a minimum of 14 hrs so no mid shift re-fueling was required. Both units have since been upgraded to 26lpm @ 210Bar.
Specifications Include:
- Yanmar 3 Cyl diesel engine
- 200 Bar, Psi Pump Operating Pressure.
- 26 Litre Per Minute Flow Rate.
- Water temps to 90⁰
- 12 Volt Diesel fired burner.
- Engine protection system.
- Genisys burner safety system.
- Comet premium series pump.
- Reduction belt drive.
- Mine Compliant.
- Class “A”.
- Safety Signage.
- 2-Pack marine epoxy coated frame & cover.