Custom Machine Builder

Choose Machine Type 2 Options

Hot Water

from $4,000.00 + Gst

Cold Water

from $2,000.00 + Gst

Choose Drive 3 Options

Petrol

Increase $0,000.00 + Gst

Diesel

Increase $0,000.00 + Gst

Electric

Increase $0,000.00 + Gst

Choose Working Pressure 4 Options

Pressure is measured in Bar or pounds per square inch (PSI) and equates to how much power the unit has to clean surfaces. The PSI of a washer will determine how effectively debris will be lifted from the cleaning surface, the harder the bond, the higher the pressure required – subsequently selecting the correct machine for the application increases efficiency saving you time and money. PSI and effective working pressure or EWP should not be confused.

3000 Psi/210 Bar

Increase $0,000.00 + Gst

4000 Psi/275 Bar

Increase $0,000.00 + Gst

5000 Psi/350 Bar

Increase $0,000.00 + Gst

7250 Psi/500 Bar

Increase $0,000.00 + Gst

Choose Maximum Flow 4 Options

Flow is the amount of water discharged by the pump. Water flow effects the time it takes to clean a surface, this flow is usually measured in litre’s per minute (L/Min). This is easily measured, if you time how long it takes to fill a 10 litre bucket with the machine running (preferably on low pressure). If it takes one minute your machine has an output of 10 L/Min or if it only takes forty seconds to fill then your unit has 15L/Min. A washer with a higher flow rate is more important than having higher PSI. Having more flow will result in a much more efficient clean than an equally powered unit with lower flow rate.

15LPM

Increase $0,000.00 + Gst

The combination of pressure and flow will exceed Class A. You will require special class B training for operation. If you are unaware what the difference is, please first refer to this.

20LPM

Increase $0,000.00 + Gst

The combination of pressure and flow will exceed Class A. You will require special class B training for operation. If you are unaware what the difference is, please first refer to this.

21LPM

Increase $0,000.00 + Gst

The combination of pressure and flow will exceed Class A. You will require special class B training for operation. If you are unaware what the difference is, please first refer to this.

26LPM

Increase $0,000.00 + Gst

The combination of pressure and flow will exceed Class A. You will require special class B training for operation. If you are unaware what the difference is, please first refer to this.

Choose Burner 2 Options

240VAC Ignition and Controls for Burner

Increase $0,000.00 + Gst

12VDC Ignition and Controls for Burner

Increase $0,000.00 + Gst

Choose Frame 4 Options

Four Wheel Roll Frame

Not recommended for large diesel engine installations.

Increase $0,000.00 + Gst

Skid Frame

Increase $0,000.00 + Gst

Wall Mounted

Increase $0,000.00 + Gst

Trailer/Vehicle Mounted

Vehicle details and photos are required before quoting. If extra equipment is required, please indicate in optional accessories.

Increase $0,000.00 + Gst

Choose Accessories 3 Options

275 Bar Accessories – Class A

Increase $0,000.00 + Gst

275 Bar Accessories – Class B

Increase $0,000.00 + Gst

350 Bar Accessories – Class B

Increase $0,000.00 + Gst

UHP 500 Bar Accessories – Class B

Increase $0,000.00 + Gst

Summary

Selected Price
Type Nothing Selected -
Drive Nothing Selected -
Working Pressure Nothing Selected -
Maximum Flow Nothing Selected -
Burner Nothing Selected -
Frame Nothing Selected -
Accessories Nothing Selected -
Total $0.00

Select Machine Type

Variant ID

Price

Select Drive

Variant ID

Price

Working Pressure

Variant ID

Price

Maximum Flow

Variant ID

Price

Burner Options

Variant ID

Price

Frame Options

Variant ID

Price

Accessory Packs

Variant ID

Price

Nothing Selected

Total $0.00

Proudly stocking the following brands